Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
De Dietrich Fault code De Dietrich
E02.39

Pressure too low after automatic filling

Breakdown: the boiler is stopped

During automatic filling the system water pressure has not risen enough (on the MCR-S: minimum pressure not reached after 6 minutes): for example a leak, a closed water tap or the filling device. On AMC 24/28 BIC, MCR-S, MPX2 Compact and Virtuens boilers it is a lockout: the boiler stops and only starts again once the cause has been removed and the boiler has been reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show E02.39?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code E02.39

The meaning depends on the boiler: find yours below.

E.02.39

AF low press rise

Breakdown: the boiler is stopped AMC
E.02.39

Minimum pressure not reached after 6 minutes of automatic filling

Breakdown: the boiler is stopped MCR-S
E02.39

Insufficient pressure rise after an automatic filling

Breakdown: the boiler is stopped MPX2 Compact, Virtuens

What our technician checks

  • Leaks in the boiler and the system
  • The system water pressure
  • The main water tap and the filling tap, open
  • Operation of the automatic filling
  • The water pressure sensor and the pressure switch wiring
  • The safety valve
  • The circuit board, replaced if needed

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.