Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
De Dietrich Fault code De Dietrich
E02.07

Water pressure too low

Breakdown: the boiler is stopped

The heating water pressure is too low, for example because the system is not properly bled or there is a water leak, or because of a measuring error. On the Modulens O AFC-S it is a lockout: the boiler stops and only starts again once the cause has been removed and the boiler has been reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Check the water pressure on the display: below 0.8 bar, top up with water as the user manual explains (recommended pressure 1.5 to 2.0 bar).
  3. Reset the boiler once only.
  4. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show E02.07?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code E02.07

The meaning depends on the boiler: find yours below.

E02.07

Water pressure error active

Breakdown: the boiler is stopped Modulens O AFC-S

What our technician checks

  • Topping up with water, then resetting the boiler
  • Bleeding the hydraulic circuit
  • A water leak on the boiler or the system
  • The pressure measurement (measuring error)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.