Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
De Dietrich Fault code De Dietrich
E.00.20

Flue gas temperature sensor missing or open

Breakdown: the boiler is stopped

The sensor that measures the temperature of the flue gases (the burnt gases leaving through the flue) is not connected or is open, or reads below its range, because of a bad connection, a badly fitted sensor or a faulty sensor. On the AMC Pro Evo, C 230 Evo and MCR-S it is a lockout: the boiler stops and only starts again after our technician has removed the cause and reset it.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Do not reset the boiler: call us.

Does your boiler show E.00.20?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code E.00.20

The meaning depends on the boiler: find yours below.

E.00.20

T flue gas open

Breakdown: the boiler is stopped AMC Pro Evo, C 230 Evo
E.00.20

The flue gas temperature sensor is not connected or has measured a temperature…

Breakdown: the boiler is stopped MCR-S

What our technician checks

  • The wiring and connectors of the flue gas sensor
  • How the sensor is fitted
  • How the sensor works
  • The sensor, replaced if it is faulty

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.