Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Buderus Fault code Buderus
811

Thermal disinfection of hot water failed

Blocking: it retries by itself

The thermal disinfection of the domestic hot water, which protects against bacteria such as Legionella, has failed. Continuous hot water use during the disinfection can prevent it from completing; otherwise, a setting or a part needs to be checked.

What you can do

  1. During a thermal disinfection, do not run any hot water: risk of severe scalding.
  2. Write down the code shown, the number next to it if there is one, and the boiler model (on the rating plate).
  3. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show 811?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

Buderus

Choose a real expert

Ecowatt is an approved Buderus System Partner: factory training in Germany, direct access to spare parts, one contact.

The variants of code 811

The small number shown beside the code tells which.

811

DHW production: thermal disinfection failed

Blocking: it retries by itself GB192i.2, GB272

The boilers that show this code

What our technician checks

  • Continuous hot water draw during the disinfection
  • The position of the hot water sensor and its contact with the cylinder
  • The bleeding of the cylinder circuit
  • Hot water production set to "Priority"
  • Limescale in the plate heat exchanger
  • The size of the recirculation line and the heat losses

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.