Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Buderus Fault code Buderus
341

Temperature rising too fast

Blocking: it retries by itself

The temperature measured at the boiler flow is rising too fast. The boiler stops temporarily and restarts by itself once the fault is cleared.

What you can do

  1. Write down the code shown, the number next to it if there is one, and the boiler model (on the rating plate).
  2. Check that enough radiators are open.
  3. Bleed the radiators, then check the water pressure again.
  4. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show 341?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

Buderus

Choose a real expert

Ecowatt is an approved Buderus System Partner: factory training in Germany, direct access to spare parts, one contact.

The variants of code 341

The small number shown beside the code tells which.

341

The temperature measured by the flow temperature sensor is rising too fast

Blocking: it retries by itself GB192i

The boilers that show this code

What our technician checks

  • The water pressure, and venting of the system and the boiler
  • The water flow in the system, isolation valves open
  • The pump and the sensor concerned: wiring and operation; replaced if necessary

The same fault on other boilers

Recent boilers show alone the number older ones show beside the code.

2P

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.