Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Bosch Fault code Bosch
281

Pump blocked or running dry

Blocking: it retries by itself

The boiler's pump is blocked or running dry, for example because of air in the system. It is a fault code: the boiler no longer works normally and needs our technician.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Check the water pressure on the gauge: normally between 1 and 2 bar. Too low? Top up, with the boiler cold, as your installer showed you.
  3. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show 281?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 281

The meaning depends on the boiler: find yours below.

281

Pump blocked or running dry

Blocking: it retries by itself GC2300iW

The boilers that show this code

What our technician checks

  • Bleeding the air out of the system
  • The pump, replaced if needed

The same fault on other boilers

Recent boilers show alone the number older ones show beside the code.

A1

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.