Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Bosch Fault code Bosch
228

Flame signal with the burner off

Breakdown: the boiler is stopped

The boiler receives a flame signal while its burner is off; the electrodes, their cable, the gas valve or the boiler's electronics may be the cause. It is a locking fault: for safety, the boiler stops and only restarts after a reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 228?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 228

The meaning depends on the boiler: find yours below.

228

Flame signal although the burner is off

Breakdown: the boiler is stopped GC2300iW

The boilers that show this code

What our technician checks

  • Whether there really is a flame
  • The electrodes and their cable, replaced if needed
  • The gas valve, replaced if needed
  • The boiler's electronics, replaced if needed

The same fault on other boilers

Recent boilers show alone the number older ones show beside the code.

F7

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.