Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Weishaupt Fault code Weishaupt
d1h

Servomotor connection fault

Breakdown: the boiler is stopped

The link between the combustion manager and the air damper servomotor has a fault: a faulty connection, a missing coding plug or parameter E0 set wrong. The burner has locked out: the boiler does not heat until the burner is reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show d1h?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code d1h

The meaning depends on the boiler: find yours below.

d1h

The connection to the actuator is faulty / Coding plug missing for actuator connection / Parameter E0 incorrectly configured

Breakdown: the boiler is stopped W-FM 25

What our technician checks

  • The combustion manager plug, refitted correctly with the power off, then the W-FM cover put back
  • The coding plug on the servomotor connection, to be plugged in
  • The configuration of parameter E0

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.