Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Viessmann Fault code Viessmann
979

Thermostat and OpenTherm control both connected

Blocking: it retries by itself

Two of the boiler's inputs are calling for heat at the same time, a device on plug 96 (a room thermostat, for example) and an OpenTherm control, while only one of these inputs may be used. The boiler then heats non-stop and the rooms get warmer than requested, until our technician removes one of the two connections.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show 979?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 979

The meaning depends on the boiler: find yours below.

979

Both inputs, plug 96 and Open-Therm, are assigned and signal a heat demand

Blocking: it retries by itself Vitodens 100-W B1HF

What our technician checks

  • The external devices or the wire link connected to plug 96 and to the OpenTherm input
  • Only one input in use, plug 96 or OpenTherm

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.