Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Viessmann Fault code Viessmann
64

Flame lost during operation

Blocking: it retries by itself

The burner flame went out during its stabilisation phase or while running. The boiler restarts the burner by itself; if the code keeps coming back, the gas supply and the electrodes need checking.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Check that the boiler's gas supply valve is open.
  3. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show 64?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 64

The meaning depends on the boiler: find yours below.

64

Loss of flame during the stabilisation or operating phase

Blocking: it retries by itself Vitodens 100-W B1HF

What our technician checks

  • The gas supply: pressure and gas flow monitor
  • Flue gas recirculation in the flue and air ducts
  • The ionisation electrode or the ignition and monitoring electrode, replaced if needed
  • The distance to the burner gauze and fouling of the electrode

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.