Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Viessmann Fault code Viessmann
347

Flue gas recirculation detected

Breakdown: the boiler is stopped

The boiler detects flue gas recirculation: burnt gases come back into the combustion air instead of being carried away, for example because of a leak or a blockage in the flue. For safety, the burner locks out and the boiler only starts again after a reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Smell of flue gas in the room? Switch the boiler off, air the room and close the doors to the living areas, then call us.
  3. Do not reset the boiler: call us.

Does your boiler show 347?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 347

The meaning depends on the boiler: find yours below.

347

Flue gas recirculation

Breakdown: the boiler is stopped Vitodens 100-W B1HF

What our technician checks

  • The flue system for leaks, repaired if needed
  • Flue gas build-up in the flue: too shallow a slope, a narrowing or a blockage

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.