Ionisation current calibration error
Breakdown: the boiler is stopped
The boiler failed to calibrate its ionisation current, the electrical signal it uses to monitor its flame. The burner locks out and the boiler only starts again after a reset.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Check that the boiler's gas tap is open.
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Does your boiler show 346?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code 346
The meaning depends on the boiler: find yours below.
Ionisation current calibration error
What our technician checks
- The gas supply pressure
- The inlet strainer of the combined gas valve (fouling)
- The ionisation electrode or ignition/monitoring electrode (fouling)
- The flue system and any flue gas recirculation
- The condensate drain (build-up)