Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Viessmann Fault code Viessmann
176

Condensate built up in the heat cell

Breakdown: the boiler is stopped

Condensate water has built up in the heat cell of the boiler. The burner locks out and the boiler only starts again after a reset, but our technician needs to clear the build-up and replace several burner parts.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 176?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 176

The meaning depends on the boiler: find yours below.

176

Condensate accumulation in the heat cell

Breakdown: the boiler is stopped Vitodens 100-W B1HF

What our technician checks

  • The condensate build-up, to be cleared
  • The insulating ring, the insulation block, the electrodes and the burner grid, to be replaced
  • Removing the fan unit before opening the burner, with the electronics protected from water

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.