Temperature rising too fast in hot water mode
Blocking: it retries by itself
While making domestic hot water, the temperature of the water leaving the boiler rises too fast, for example because the water is not circulating enough. It is a temporary block: the boiler stops and starts again by itself once the cause is gone.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Check the water pressure shown: if it is below 0.8 bar, top up the system with water as the user manual explains.
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show H01.21?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code H01.21
The meaning depends on the boiler: find yours below.
Flow temperature rise too fast during DHW production.
Max grad. 3 DHW
Flow temperature rises too quickly during DHW production.
Flow temperature rise too fast during DHW production.
Max grad. 3 DHW
Maximum temperature gradient level 3 in DHW
What our technician checks
- Water circulation: direction, pump and valves
- How the pump works
- The system water pressure
- Bleeding the air out of the system
- How the temperature sensors work and are fitted
- The temperature sensor connections