Maximum flow temperature exceeded
Blocking: it retries by itself
The water leaving the boiler (or coming back, on the Ace-Matic and Avanta Ace) has gone above its maximum operating temperature, for example because the water is not circulating enough. It is a temporary block: the boiler stops and starts again by itself once the cause is gone.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Check the water pressure shown: if it is below 0.8 bar, top up the system with water as the user manual explains.
- Check that the radiator valves are open.
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show H01.14?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code H01.14
The meaning depends on the boiler: find yours below.
Maximum flow or return temperature value reached.
Max flow T
Maximum flow or return temperature value reached
Max flow T
The flow temperature has exceeded the maximum operating value
What our technician checks
- The flow and return sensors
- The flow sensor wiring and connectors
- Water circulation: direction, pump and valves
- The system water pressure
- The heat exchanger for fouling
- Bleeding the air out of the system