Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Remeha Fault code Remeha
H.01.15

Flue gas temperature too high

Blocking: it retries by itself

The flue gas temperature has gone above its maximum operating value, which can come from the flue system, a heat exchanger fouled on the flue side, or the sensor. On the Calenta Ace, Quinta Ace, Quinta 45-115, Gas 210 Ace, Gas 220 Ace and Gas 320/620 Ace it is a blocking message: the boiler stops and starts again by itself once the cause is gone, but it is a flue gas code that our technician must check.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Do not reset the boiler: call us.
  3. Can you smell flue gas? Switch the boiler off, open the windows, leave the building and call us.

Does your boiler show H.01.15?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code H.01.15

The meaning depends on the boiler: find yours below.

H.01.15

Max flue T

Blocking: it retries by itself Gas 210 Ace, Gas 220 Ace, Gas 320/620 Ace, Quinta 45-115
H01.15

Max flue gas T

Blocking: it retries by itself Calenta Ace, Quinta Ace

What our technician checks

  • The flue system
  • The heat exchanger: fouling on the flue side
  • The flue gas sensor, to be replaced if faulty

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.