Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Remeha Fault code Remeha
H.01.07

Heat exchanger to return difference too high

Blocking: it retries by itself

The temperature difference between the boiler's heat exchanger and the water coming back from the heating has gone above its maximum, because of no or too little water flow in the system, or a sensor error. On the Quinta 45-115, Gas 210 Ace, Gas 220 Ace and Gas 320/620 Ace it is a blocking message: the boiler stops normal operation and starts again by itself once the cause is gone.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Check the system water pressure: below 0.8 bar, top up with water as the user manual explains (recommended pressure 1.5 to 2.0 bar).
  3. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show H.01.07?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code H.01.07

The meaning depends on the boiler: find yours below.

H.01.07

Max delta TECHT-RetT

Blocking: it retries by itself Gas 210 Ace, Gas 220 Ace, Gas 320/620 Ace, Quinta 45-115

What our technician checks

  • Water circulation: direction, pump and valves
  • The system water pressure
  • How clean the heat exchanger is
  • Whether the system has been properly bled of air
  • Operation of the sensors and how they are fitted

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.