Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Remeha Fault code Remeha
E04.08

Safety input open or overheating

Breakdown: the boiler is stopped

A safety device has shut the boiler down: on the Quinta 45-115, Tzerra Ace and Gas 210, 220 and 320/620 Ace the safety input has opened because the differential air pressure switch tripped, for example on too high a pressure in the flue; on the Avanta Ace the maximum safety temperature has been reached. The boiler locks out and stays off: the cause must be found before it is put back into service.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Do not reset the boiler: call us.

Does your boiler show E04.08?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code E04.08

The meaning depends on the boiler: find yours below.

E.04.08

Maximum safety temperature value reached

Breakdown: the boiler is stopped Avanta Ace
E.04.08

Safety input

Breakdown: the boiler is stopped Gas 210 Ace, Gas 220 Ace, Gas 320/620 Ace, Quinta 45-115
E04.08

The safety input is open

Breakdown: the boiler is stopped Tzerra Ace

What our technician checks

  • The wiring and connectors of the differential air pressure switch
  • The air supply and flue gas ducts (blockage)
  • The condensate trap, blocked or empty
  • The non-return valve, which must open
  • How clean the heat exchanger is
  • Avanta Ace: water pressure, venting, pump and circulation
  • Avanta Ace: connection and operation of the safety thermostat

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.