Too large a difference between flow sensors
Breakdown: the boiler is stopped
The two sensors that measure the flow temperature do not give the same value and the difference is too large: a sensor badly connected, badly placed or faulty, or, on the Calenta Ace-Matic and Tzerra Ace-Matic, poor water circulation. On the Calenta Ace, Tzerra Ace, Quinta Ace, Quinta 45-115, Gas 210 Ace, Gas 220 Ace, Gas 320/620 Ace, Calenta Ace-Matic and Tzerra Ace-Matic it is a lockout: the boiler stops and only starts again once the cause has been removed and the boiler has been reset.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Does your boiler show E04.07?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code E04.07
The meaning depends on the boiler: find yours below.
Flow T sensor
Maximum difference reached between the flow temperatures
Flow sensor error
The difference between flow sensors 1 and 2 is too high
Flow T sensors
What our technician checks
- The flow sensors' connection
- Where the sensor sits
- How the sensor works
- The sensor, replaced if faulty
- Pressure, bleeding, the pump and water circulation (Calenta Ace-Matic, Tzerra Ace-Matic)