Flow temperature sensor short-circuited
Breakdown: the boiler is stopped
The sensor that measures the temperature of the water leaving for the system (the flow) is short-circuited or reads above its measuring range: a bad connection, a badly fitted or a faulty sensor. On the Calenta Ace, Tzerra Ace, Quinta Ace, Quinta 45-115, Gas 210 Ace, Gas 220 Ace, Gas 320/620 Ace, Calenta Ace-Matic, Tzerra Ace-Matic and Avanta Ace it is a lockout: the boiler stops and only starts again once the cause has been removed and the boiler has been reset.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Does your boiler show E04.01?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code E04.01
The meaning depends on the boiler: find yours below.
Flow temperature sensor short-circuit
Flow T closed
Flow temperature sensor short circuit
Flow sens short
Flow sensor is short-circuited
Flow T short-circ.
What our technician checks
- The flow sensor's wiring and connectors, up to the circuit board
- How the flow sensor is fitted
- How the sensor works
- The sensor, replaced if faulty