No water circulation detected
Breakdown: the boiler is stopped
The boiler no longer detects any water circulation in its circuit; possible causes are the pressure or air in the system, the pump, the circulation in the boiler or the system, or a temperature sensor. On the Calenta Ace-Matic, Tzerra Ace-Matic and Avanta Ace it is a lockout: the boiler stops and only starts again once the cause has been removed and the boiler has been reset.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Check the system's water pressure: below 0.8 bar, top up with water as the user manual explains.
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Does your boiler show E01.17?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code E01.17
The meaning depends on the boiler: find yours below.
No water circulation (permanent)
No water circulation (permanent)
What our technician checks
- The system pressure
- A manual de-aeration (bleed) cycle
- How the pump works
- Water circulation in the boiler and the system
- The temperature sensors' operation and connection