Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Fault code Oertli
BL.DT CHA.RET.

Blocking: flow and return gap too large

Blocking: it retries by itself

The difference between the flow and return temperatures is larger than allowed: the boiler blocks for 150 seconds, then starts again by itself. It is not a fault and the boiler keeps working, but if the code keeps coming back, the pump, the water flow or the water pressure need checking.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Check that the system is full of water and under pressure; top it up if needed, without letting cold water rush into the hot boiler.
  3. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show BL.DT CHA.RET.?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code BL.DT CHA.RET.

The meaning depends on the boiler: find yours below.

BL.DT CHA.RET.

The maximum permitted difference between the flow and return temperatures is exceeded.

Blocking: it retries by itself GMR 4000 Condens

What our technician checks

  • The pump
  • The water flow
  • The water pressure

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.