Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Bosch Fault code Bosch
264

Air flow lost during operation

Blocking: it retries by itself

While the boiler is running, the air flow stops: the fan, the mains voltage, a blockage in the flue or the air pressure switch may be the cause. It is a blocking fault: the boiler stops and restarts by itself once the fault has been cleared.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show 264?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 264

The meaning depends on the boiler: find yours below.

264

No air flow during the operating phase

Blocking: it retries by itself GC2300iW

The boilers that show this code

What our technician checks

  • The connector, properly reconnected and unlocked
  • The fan, replaced if needed
  • The mains voltage, matching the specified value
  • The flue system, cleared of any blockage
  • The air pressure switch, connected or replaced
  • The pressure hose, connected or replaced

The same fault on other boilers

Recent boilers show alone the number older ones show beside the code.

C1

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.