Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Bosch Fault code Bosch
232

Boiler blocked by an external contact

Blocking: it retries by itself

An external contact connected to the boiler has opened and is blocking it: an external thermostat, a condensate pump, or a missing plug or jumper on that connection. It is a blocking fault: the boiler stops for a while and restarts by itself as soon as the contact closes.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show 232?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 232

The meaning depends on the boiler: find yours below.

232

Heat source locked by an external mechanical contactor

Blocking: it retries by itself GC2300iW

The boilers that show this code

What our technician checks

  • The external contact's plug, connected
  • The jumper, or the condensate pump as per its maker's instructions
  • The external thermostat's switching point
  • The external thermostat and its cable, replaced if needed

The same fault on other boilers

Recent boilers show alone the number older ones show beside the code.

D3

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.